mar345xf is a standalone program for
transforming raw spiral images collected on a 345 mm mar research Imaging
Plate Detector System into images on a Cartesian grid. The program applies
corrections for non-uniform response, etc.
Removes spiral images
after transformation. By default, spiral images are retained.
-old
Output
format is old 300 mm scanner output (i.e. uncompressed ".image" ). The default
is to use "PCK" compression, i.e. about 70 % compression as compared to uncompressed
"image" files.
-w
Wait with transformation for next spiral image to become
available. The image number will be increased after succesful transformation.
-e SUFFIX
The file name extension "SUFFIX" will be used. By default, extension
"s2300" is used.
-sc FAC
Applies a multiplation factor to spiral data.
-nb
NB_CODE
Uses correction file NB_CODE instead of the defaults ($MARTABLEDIR/mar2300.$MAR_SCANNER_NO
or $MARTABLEDIR/mar3450.$MAR_SCANNER_NO).
-nfrm NFRM
A series of NFRM spiral
images will be transformed starting with the spiral image spiral_root.
spiral_root [ffrm lfrm [SUFFIX]]
The root name of the spiral files can
be entered in 2 ways: or the root name and a three-digit image number, e.g.
"xtal_001", or just the root name, e.g. "xtal". In the first case, the optional
argument -nfrm NFRM tells the program to transform NFRM spiral images starting
with the one given by "spiral_root". In the latter case, two more arguments
must be given: the starting ("ffrm") and ending ("lfrm") image number.
If the last argument (normally lfrm) is not a number, it will be used
as the filename SUFFIX.