Zum Hauptinhalt springen

EIGER2 Hybrid Photon Counting Detectors

EIGER2 R 4M: 2 x 4 modules, 155 x 162 mm active area, 2068 x 2162 pixels, 20 frames/second
EIGER2 R 4M:
  • 2 x 4 modules
  • 155 X 162 mm active area
  • 2068 X 2162 pixels
  • 20 frames/second
mardtb
  • Travel range along beam: 40 - 390 mm
  • 2-theta range: 0 - 30 deg.
  • Max. resolution with Cu-Ka: approx 1.1 Ang.
PHI-axis:
  • Resolution: 0.002°
  • Speed: 1°/sec
  • Sphere of confusion: < 10 μm
Crystal monitor

Built-in monitor (7'') for sample centering

The EIGER2 detector is the latest masterpieces of DECTRIS AG. It features a newly designed sophisticated read-out system with dual energy discrimination that effectively suppresses background and improves signal-to-noise. Two analog circuits allow for simultaneous read and write operation with NO DEADTIME!  The EIGER2 detectors have a small pixelsize of only 75 microns (PILATUS3: 172 microns) and hence a larger amount of pixels as compared to a PILATUS3 detector of the same physical dimension. 

marXperts now also offers full support for the EIGER2 series of detectors with our mardtb goniostat. In fact, the EIGER2 detectors are the perfect fit for the mardtb and data collection is fully integrated into our well-known data collection software.

HIGHLIGHTS

SPEED

Extremely short read-out time of < 1 μsec allows for fine φ-slicing and shutterless data collection.

PIXELSIZE

Very small pixels of only 75 μm

SENSITIVITY

Extremely high, no point-spread due to direct conversion leading to small spots with better I/σ

NOISE

Virtually no read-out noise

DYNAMIC RANGE

Virtually unlimited (32-bits)
Enlarge
Enlarge
Enlarge

    CONFIGURATIONS

    mardtb desktop beamline with Eiger R 4M detector
    mardtb:
    The EIGER2 R 4M or 1M detector is mounted on a mardtb goniostat. The mardtb  “desktop beamline” features a fully automatic beam alignment system and more than 10 motors including an “inverted PHI” assembly and a 2-theta stage. The system can be operated with any X-ray source (sealed tubes to synchrotrons).
    marmuX3G Data Collection System marYX3G:
    An EIGER2 R 4M or 1M detector with a mardtb goniostat in combination with a marµX microfocus generator. This system is the perfect choice, when cost-of-ownership and maintenance issues come into play. Despite of the low price, the system is highly suitable for fast screening experiments, but also for complete data collections of small crystals and other kinds of diffraction experiments.
    Excillum MetalJet X-ray source metaljet:
     If you are aiming for the ultimate performance in the home lab, a combination of a MetalJet X-ray source with a EIGER2 R 4M detector and a mardtb goniostat is the very best you can obtain today. Excillum's patented MetalJet technology beats any other conventional X-ray source in terms of brilliance and is a true alternative to a synchrotron. Please contact us for further details!

    UPGRADE OF  mar345dtb

    Existing mar345dtb detector sytems can easily be upgraded with an EIGER2 detector, i.e.  the mardtb can be used together with the EIGER2 R 4M or 1M detector. Due to its larger detector surface that eliminates requirements for collecting multiple data sets at 2-theta offsets, the EIGER2 R 4M detector clearly is your first choice.  When  using the small EIGER2 R 1M detector, it is possible to mount the detector in front of the mar345 detector. One can then easily take away the small EIGER2 detector and use the large mar345 image plate detector if there is a need for a large detector surface. For this special combination the range of movement of the distance translation stage of the mardtb goniostat is 22 to 150 mm for the EIGER2 R 1M detector and 120 to 425 mm for the mar345 detector.

    APPLICATION NOTE

    An exiting experiment has been done with a mar4M system consisting of the EIGER(1) R 4M detector and a mardtb goniostat. The setup has been used to collect  a complete data set of a large protein with 350 amino residues to high resolution (1.5 Ang.) in just 30 minutes with extraordinary quality. Please see the application note AN07Sep17 for further details.

    Specifications for EIGER2 R series
     

    EIGER2 R 4M

    EIGER2 R 1M
    Number of detector modules 2 x 4 2
    Max. frame rate [Hz]: 20 100
    Active detector area [mm]: 155.1 x 162.2 77.1 x 79.7
    Number of pixels: 2068 x 2162 1028 x 1062
    Energy thresholds: 2
    Counter depth (bits/threshold): 2 x 16
    Dead time [μs]: 0
    Pixel size [µm] 75 x 75
    Dynamic range
    32 bits
    Weight [kg] 15 3.9
    Power consumption [W] 300 75
    Outside dimensions (H x W x L) 235 x 237 x 372 114 x 133 x 240
    Computer requirements
    CPU Intel or AMD, ≥ 2GHz, ≥ 4-cores
    Memory (RAM) ≥ 8 GB
    Disk space ≥ 512 GB
    Monitor: 2560 x 1440 pixels (WQHD) or better (4K)!
    Network card: Dedicated >= 1 Gbit/s
    TV-card: Optional feature for mardtb goniometer
    Supported OS: Linux: Ubuntu
    On request: Mac OS X, Windows, other Linux flavours

    DOWNLOADS